• Double Roof ( Flat Roof + Outdoor Roof With Asphalt Shingles, Choose Peak Or Slope Design)
• Insulation
• Real Western Canadian Red Cedar Wood Outside And Inside
• Harvia Heater
• Eco-Certified
• Non-Toxic
• Bluetooth Player With Speakers (FM/USB/AUX/MP3)
• Heater Temperature Range: 0-189 F

Product Specification:

• INTERIOR SPECIFICATION
• Width: 57"
• Depth: 47"
• Height: 73"
• Bench: 55" x 22"

• EXTERIOR SPECIFICATION
  
• Width: 61"
• Depth: 51"
• Height: (Peak) 96" / (Slope) 86" / (Indoor) 76"

• ROOF SPECIFICATION
• Slope Roof Width: 75" / Depth: 65"
• Peak Roof Width: 73" / Depth: 63"
• Indoor Width: 60" / Depth: 60"

• UNIT WEIGHT
• Number of Boxes: 5
• Peak Roof Weight: 775 lbs / Shipping Weight: 825 lbs
• Indoor & Peak Roof: Weight: 825 lbs / Shipping weight: 875lbs

• ELECTRICAL:
• Voltage: 220/240 V / 20-30 AMP
• Traditional: Hardwire (recommended), plug sent separately if preferred
• Electrical Heater Wattage: 4500 W

Product Manual:

Specification Sheet

Receiving your Sauna Checklist

Sealant Guide

User Manual

Enlighten Installation:

With a purchase of Enlighten Sauna, you can also have your sauna installed. This is how it works:

• At checkout, you will choose the Installation option which will be listed as free. At this point, there is no commitment for you to actually go through with this option
• After you complete your order: you will receive information form from us asking for you to send us a video, photos, or both where of where you would like the sauna to be placed and the route required to get there from the road as well as the installation agreement. We will also provide you with a base quote (See bottom page) which may increase depending on the complexity of your installation. The sauna must be placed on a flat surface, and it must be a concrete slab or high quality wood (or other). However, it cannot be placed on the dirt ground.
• After we receive the completed form: we will get back to you promptly with a full quote for the installation depending on the difficulty of accessign the location where you would like the sauna installed and the surface which it will be installed on. 

You may then complete payment for installation, and your appointment will be booked!

After you receive your quote, if you would prefer to outsource to your own installer, or put it together yourself (usually between 2-5 hours depending on experience and number of people setting it up), your order will remain completely valid and you will receive free curbside delivery. You may upgrade to threshold delivery (where the item will be placed outside of your door or sheltered area). If possible, we recommend putting the sauna together yourself, it will save you lots of money, and it is not an overly difficult installation process, especially with a few people. 

You must cancel your installation 48 hours before it occurs, or you will be charged 30% for late cancellation. Any rescheduling also must be made ahead of 48 hours in advance. 

Base Prices: Full Installation Services

40 miles radius of zip code: 94010

Southern California

Outside California

Electrical

Please note:  Above is for assembly of the sauna. The installation crew will not be able to configure your electrical requirements. It is important to note, the saunas have varying volts depending on the size. Some saunas will be able to be easily hooked up to electrical set ups with no changes needed, but others may require a larger volt plug. We are happy to provide you the specific electrical requirements of each, but recommend contacting an electrician if you are not sure of your precise requirements and whether you will need to make adjustments. We are also happy to help find an electrician in your area.